ASC 150PC Domestic Water Pump
The ASC150PC is a self priming pump suitable for spear point applications. With self priming capabilities, the pump has a suction capacity of 9 meters. It also means the pump will automatically re-prime in the event of running dry from your water source. The pump is suitable for domestic and garden application. The ASC 150PC comes with an automatic pressure controller that will start and stop the pump on demand, and also includes dry run protection.
Pump Characteristics:
- Automatic Pressure Controller to turn the pump on and off on demand, with built in dry run protection.
- Run dry protection to prevent pump damage.
- Automatic electronic control has in-built check valve to prevent water back flow through the pump.
- 2.2bar pump cut in for greater versatility.
- Corrosion resistant pump body, diffuser and stainless steel impeller to ensure pump durability.
- High quality mechanical shaft seal and high quality bearings.
- 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.
- IP55 Protection / Insulation F
- 9m suction head
- Suitable for medium to large garden irrigation and whole of house double storey domestic home.
Motor / power: 1000W
Amps: 6.2A
Max. flow: 80T/min
Taps: 7-8 taps (calculated at 10lt/min)
Head: 50m
Suction hose diameter: 1″ / 25mm
Pressure: 500kPa
Body: Stainless steel
Impeller: Stainless steel
Mechanical Seal : Carbon/Ceramic/Nitrile
Warranty on pump: 2 Years
A | 98mm
B | 198mm
D | 219mm
E| 160mm
F | 97mm
L | 417mm
H | 216mm
H1 | 212mm
H2 | 105mm
DNA | 25mm
DNM | 25mm
1 . Plug
2. Washer
3. Dust Cap
4. Inside Hexagonal Bolt
5. Pump Housing Component
6. O-Ring
7. O-Ring
8. Ejector
9. Hexagonal Nut
10. Washer
11. Impeller
12. Spring Washer
13. Mechanical Seal
14. Motor