Onga Farmmaster JJ600, 240V Shallow Well Pump (injectors sold separately)
The Farmmaster Junior Jet JJ range are compact and efficient pumps. Constructed in cast iron with precision-moulded hydraulic components they are built for many years of hard work. Suitable for stock watering irrigation and water transfer from dams creeks wells and bores. With a range of shallow & deep well injectors these pumps cater to a variety of performance requirements. Simply by changing the injector you can utilise the pump for different applications e.g. Low head water transfer and low volume house pressure supply.
Horizontal, single-stage, surface mounted centrifugal pump. Jet and venturi assisted performance with closed impeller for pumping debris free water. Cast iron injector housing and pump casing with 1½“ BSP (female) inlet and ¾“ BSP (female) outlet.
Features:
- Strong Cast Iron Construction
- Injectors to suit large range of applications
- Offset combinations available
- No moving parts down the bore
- Shallow well lifts to 7.6m
- Deep Well lifts to 37m
- Manual or automatic system
- Max head – 63m
- Max flow 137lpm
Warranty:
2 Years Warranty
Operating Conditions:
Fluid: Water
Maximum water temperature: 55°C
Minimum water temperature: 1°C
Maximum ambient temperature: 40°C
Scope of Supply:
JJ pump and motor
Pressure Switch Fitted
Pressure Gauge
Please note no pressure tank or injector included as standard.
Electrical Data:
Pump Construction Materials
Component | Material |
Pump Casing | Cast Iron |
Casing Spigot | N/A |
Baffle | Noryl |
Priming / Drain Plug | Acetal |
Impeller | Polycarb 20% glass filled |
Diffuser | Noryl |
Shaft Sleeve | Nylon |
Seal Flexible Bellows | Elastomer EPDM |
Seal Stationary Face | Ceramic |
Seal Rotation Face | Resin impregnated carbon graphite |
Seal Spring | 304 stainless steel |
Motor Shaft | Mild Steel |
Features:
- The JJ pumps equipped with deep well injectors are ideal for supplying water from sources where the suction lift is greater than 7.6 metre
- Potential to draw water from any source down to 37 metres using deep well injectors
- If your source changes, they can easily be converted between shallow well and deep well applications – there is no need to buy another pump
- Non-corroding injector materials make it suitable for hard water areas
- Cast iron casing and other parts make it suitable for rugged conditions
- Heavy duty industrial totally enclosed, fan cooled motor provides long life
- Both single and three phase available in the JJ600 model
Applications:
- Tank Filling
- Stock watering
- Irrigation and water transfer from dams, creeks, wells and bores
*Pictures for illustrative purposes only*