Reflex 8LT Pressure Tank 16 Bar

20.6mm
33.7mm
20.6mm

$221.00

Product Documents

SKU: DE8-16 Categories: ,

Reflex DE8 Reflex Pressure Tank 10 Bar 16 Litres

Reflex Tanks are highly constructed pressure tanks suitable for most domestic and commercial applications.

  • Nominal volume: 8L
  • Nominal Draw-off: 3L
  • Continuous max. temp 70°C
  • Continuous max. pressure: 16 Bar
  • Pre-charge: 4 Bar (58PSI)
  • Diameter: 206 mm
  • Height: 337mm
  • Net Weight: 2.8Kg
  • System Connection: GI
  • Colour: BLUE RAL 5007
  • 5 Year Warranty
Materials of Construction
Pressure Tank Steel
Internal Coating Not Required
Water Connection Stainless Steel
Air Valve Stem Brass
Support Legs N/A
Membrane N/A
Bladder Yes

Features and Benefits

  • Manufactured in EU
  • 304 Stainless Steel water connection
  • Corrosion resistant for long life
  • UV resistant epoxy coating with a minimum thickness of 30 micron in blue RAL5007
  • Air valve with sealing cap eliminates leaks
  • Food grade approved high-grade butyl membranes and bladders WRAS, ACS,AS/NZS4020
  • 5 Year Tank Replacement Guarantee
Applications
  • Booster Systems
  • Borehole Systems
  • Sprinklers
  • Irrigation Systems
  • HVAC
  • Thermal Expansion
  • Water hammer arresting
Energy Saving Device
  • An energy saving device such as a Reflex Pressure Tank stores energy in the form of pressurized water.
  • The energy is transformed by the pump from electricity to water pressure. With a Reflex tank there is no loss of energy once it has been stored in the device.
  • By installing a Reflex Tank, the pump start events can be cut by 40 – 80%
  • Saving Power
  • Extending Pump Life
  • Reducing Noise
  • Low Initial Cost – The Reflex Tank is easy to fit to pumps and can even be wall mounted, the tank can be installed within minutes and can be fitted to any brand or type of pump.
Setup & Installation
  1. Pressure switch controlled pumps with differential pressure set at 140 kPa (20 psi), pre-charge the tank to 20 kPa (3 psi) below the cut in pressure.
  2. For pumps controlled by pressure switches with higher differential pressures, electronic controls or variable speed controls, pre-charge the tank to 65% of the maximum system pressure.
  3. Pressure tanks installed on mains pressure, pre-charge should be set at the mains pressure.
  4. For hot water expansion, pre-charge should be set at the mains pressure.
Weight 2.70 kg
Dimensions 20.6 × 20.6 × 33.2 cm
Capacity

8LT

Draw Off

3LT

Pressure

10 Bar

Fitting Size

25mm / 1"

Warranty

5 Years

Brand

Reflex

Reflex Winkelmann GmbH – part of the Building+Industry division – is a leading provider of high quality cold water, heating and hot-water supply technology. Under its Reflex brand, the company, develops, produces and sells not only expansion vessels, but also innovative components and holistic solutions for potable cold water, pressure maintenance, water make-up, degassing and water treatment, hot water storage tanks, heat exchangers, as well as hydraulic manifolds and storage components. With its headquarters located in Ahlen in the German region of Westphalia,
Wishlist 0
Continue Shopping