90mm Sliding Gate Valve (Stainless Steel Paddle)
SKU: HW0903
Stainless steel paddle has the strength to close off during mid flow (max closing pressure 60kPa).
Ideal for applications where an active water flow needs to be shut-off or diverted.
Suitable for low pressure applications (sealing pressure rated to 210kPa).
Ergonomically designed handle, allowing for easy opening and closing.
Manufactured from UV stabilised PVC with stainless steel hardware.
Can be used as a wet system drain valve on rain harvesting systems.
Compact and robust design.
90mm Female socket fit.
Installation
- Select your desired installation point. The Sliding Gate Valve can be installed in the vertical or horizontal position.
- Measure and remove a 35mm section of pipe at your desired installation point. Ensure all cut edges are clean and smooth.
- Use priming fluid to clean inside the sockets of the Sliding Gate Valve and outside of the pipes you will be gluing the valve to.
- Apply solvent weld glue first to inside the sockets of the Sliding Gate Valve and then to the outside of the pipes, bring together and ensure pipes are inserted fully into the sockets of the Sliding Gate Valve. Hold for a minimum of 60 seconds or until secure.