ASC SKD-6 Automatic Pressure Controller
Features and Benefits
- Starts and stops the pump automatically when the tap is open or closed. This means the pump does not need to be turned off manually.
- Maintains a constant pressure from the pump during operation resulting in a reliable water supply.
- Automatically stops the pump in the situation of no flow (due to inlet pump blockage)
- The controller eliminates pressure fluctuations at flows as low as 1L/min.
- Plug and play leads (IEC type) are installed on the controller so that a licensed electrician is not required to replace the controller.
Technical Specifications
Bar: 10 Bar
Brand: ASC
Casing Material: Technopolymer
Kilo Watts: 1.5 kW
Port Size Inlet: 1″ BSPM Inlet
Port Size Outlet 1″ BSPM outlet
Product Type: Pump Controller
Volts: 240 V
Construction Characteristics
Inlet: 1″ BSP male
Outlet:1″ BSP male
Built in non-return valve
No flow/loss of prime protection
Manual start switch (RESET)
Voltage LED (GREEN power on light)
Pump working LED (ORANGE pump on light)
No flow LED (RED failure light)
1.5 metre lead and 3 pin Australian/New Zealand plug
0.6 metre pump power lead, plug and play
Inbuilt 10 bar pressure gauge
Technical Information
IEC type
Voltage: 220V (-6%) / 240V ( 6%)
Maximum Current: 16(8) Amps
Maximum kW: 1.5kW
Frequency: 50Hz
Ingress Protection: IP65
Maximum Water Temperature: 60 deg C
Starting Pressure: 2.2 bar
Recommended Minimum Pump Pressure Required: 3.0 bar
Maximum Working Pressure: 10 bar
Minimum Flow: 1.0 l/m
