Atlas Filtri DP Duo Filter Housing 20″ Big with 1.5″ Fittings
Supplied with filters:
1 x 20µm Pleated Polyester 20″ Jumbo Cartridge 20″ x 4.5″ [807308]
1 x 1µm Polyspun 20″ Jumbo Cartridge 20″ x 4.5″ [807300]
- A Duo 20” BIG Filter housing, with 1.5” in/out plastic BSP threads, pressure gauge (manometer) ports and drain port.
- Chooses the Duo with 2 filter bowls on a single moulded head to save time plumbing up separate housings when you need to use two in series and reduce the number of potential leak points,
- Designed to accept 20”x 4.5” filter cartridges.
- These are most commonly used domestic, commercial and industrial applications
Technical Specifications
| Brand | Atlas Filtri |
| Product Type | Big Housings |
| Material | Reinforced Polypropylene |
| Inlet/Outlet | 1.5″ |
| Max Pressure (bar) | 8.3 |
| Min Temp (degrees celsius) | 4 |
| Max Temp (degrees celsius) | 45 |
| Application | Whole Supply |
| Filter | 20″ Big |
A: 640mm
B: 390mm
C: 185mm
Features
These have time and labor saving additions built in:
- Pressure gauge ports – no more need to plumb pressure gauges separately
- Adding pressure gauges makes it easier than ever to see when filters need changed, giving you optimal life and performance of your filters
- Drain Ports – Making changing filters easier than ever
- Just open the drain port and drain the water into a bucket, no more messy water splashing on the floor, and the filter bowl is lighter and easier to manage
- Drain ports are easy to open with the your included reversible spanner, one side for the filter bowl, the other for the drain port
These are available in:
- Mono – single filter housing
- Duo – Double Filter housing with moulded head
- Trio – Triple – Filter housing with moulded head
All Atlas Filtri BIG Housings come with:
- Bracket
- Spanner
- Lubrikit (O-ring lubricant)
| Working Conditions | |
|---|---|
| Max Working Pressure | 8.3bar (120 psi) |
| Max Working Temperature | 45°C (113°F) |
| Min Working Temperature | 4°C (39.2°F) |
Filters Included
Technical Specifications
| Brand | Atlas Filtri |
| Product Type | Pleated Filters |
| Flow Rate (L/min) | 82 |
| Material | Polypropylene/Polyester Fabric |
| Nominal Micron Rating | 20 |
| Min Temp (degrees celsius) | 4 |
| Max Temp (degrees celsius) | 45 |
| Filter | 20″ Big |
| Brand | Atlas Filtri |
| Product Type | Polyspun Filters |
| Flow Rate (L/min) | 67 |
| Material | Polypropylene |
| Nominal Micron Rating | 1 |
| Min Temp (degrees celsius) | 4 |
| Max Temp (degrees celsius) | 80 |
| Filter | 20″ Big |
SEDIMENT FILTERS
- Sediment Filters are used to remove particles from water and protect downstream taps etc from clogging
- Sediment cartridges are resistant to attack by bacteria and chemicals and are suitable for a wide range of applications, including domestic, commercial and industrial.
CS & TS Pleated Cartridge Range
- Polyspun cartridges are commonly used as the final filtration for sediment as damage does not compromise the micron rating
- These depth filters have a very large surface area and better dirt holding capacity than pleated filters
- 5 & 1 Micron versions are also often used as the final filter before a UV as drinking water standards require a minimum of 5 micron depth filtration
- 25 Micron version is sometimes used in place of a pleated filter for those who prefer to just change filters without the need to clean them, the higher dirt holding capacity means more time between giving the filters attention
