Bianco INOX45LIGHT Domestic Pump
(804913)
Replacing the INOX45S2MPCX as the INOX45S2MPCX has now been superceded.
The pump is a self-priming surface mounted pressure system pump supplied with plug and play leads (IEC type). The self-priming ability provides excellent suction capacity of up to 9m. Used especially for supplying water to domestic installations.
The pump is characterised by:
- Automatic electronic pump control fitted and wired with plug and play leads so a licensed electrician is not required during installation.
- Includes fully electronic pump controller for automatic pump starting, stopping and restart after power loss and water loss.
- Run dry protection to prevent pump damage
- Automatic electronic control has in-built check valve to prevent water backflow through the pump.
- 2.2bar pump cut in for greater versatility.
- Corrosion resistant pump body, diffuser and impeller to ensure pump durability
- High quality mechanical shaft seal and high quality bearings
- 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.
Applications
• Household water supply – small dwellings
• Light garden irrigation
• Water transfer
• Washing systems
• Pressure boosting
Package Information
- Weight: 11 kg
- Dimensions (mm): 420L x 230W x 460H
Motor / power:Â 450W
Max. Flow: 58L/min
Taps:Â 4 taps (calculated at 8lt/min)
Head: 40m
Suction hose diameter: 1″ / 25mm
Pressure:Â 380kPa
Body:Â Stainless Steel
Impeller:Â Technopolymer
Mechanical Seal :Â Carbon/Ceramic/Nitrile
Warranty: 3 Years
AS/NZS 4020 Drinking Water Approved.
INOX45LITE Electrical data:
- Rated voltage: 240V
- Mains frequency: 50 Hz
- Current: 3.5 amps
- Rated Output: 450W
- Capacitor: 10 uF
- Motor duty: Continuous
- Motor type: Asynchronous, TEFC
- Motor protection: In-built thermal overload
- Ingress protection: IP X4
- Insulation class: F
- Power cable length: 1.5m long 10 amp rated H05 flex 10 amp 3 pin plug
- Net weight: 11 kg
- Liquid: Clean water temperature range: 2 – 40 °C
- Materials: Pump body, Diffuser, Impeller: Stainless Steel, Technopolymer.
- Mechanical seal: Silicon Carbide/Carbon
- O rings: Nitrile
- Installation: Maximum ambient temperature: 40 °C
- Maximum operating pressure: 6 bar
- Pressure tank (to be purchased separately) : 3, 8 or 18 litre recommended