DAB A2-Divertron 900A Submersible Pump Mains Switch Over (replaces A2-Divertron1200)
[811256]
The DAB Divertron is a submersible pump with integrated on/off electronics for domestic water supply.
Ideal for irrigation and gardening and for the reuse of rainwater, it can be installed inside collecting tanks, wells and tanks with a maximum immersion depth of 12 metres.
- Incorporates an electronic automatic restart pump control with dry run protection
- Fully automatic operation
- In-built non-return valve and flow sensor
- Supplied wired and ready to install
- Quiet operation
- Simple installation
- Does not require external pump control
How does the AcquaSaver Work?
The AcquaSaver® Valve will always prioritize the use of rainwater over mains water when rainwater is available and will automatically switch over to mains water in the event of the rainwater tank running low or electrical failure
When rainwater has been replenished or power has been restored to the pump, the AcquaSaver valve will automatically prioritize back to rainwater.
The pump is only active when rainwater is being drawn from the water tank, it does not operate when the AcquaSaver Valve has switched to mains position.
The pump controller starts and stops the pump when it detects a demand – for example flushing a toilet or using a washing machine.
The operating mechanism of the AcquaSaver Valve is a unique patent design, it works by hydraulic water pressure created by the pump to close one inlet fully before opening the other inlet. This ensures an extremely reliable mechanism using few moving parts and no electronic components and no energy consumption.
Technical Specifications
| Brand | DAB Pumps |
| Product Type | Pressure System |
| Suitable For | Clean Water |
| Bar | 4.5 Bar |
| Approval | Approved For Drinking Water |
| Cable | 15 m |
| Flow Range Category | a. 0 – 99 L/min |
| Flow Rate (L/min) | 95 L/min |
| Hp | 1 Hp |
| kPa | 486 kPa |
| Kilo Watts | 0.56 kW |
| Head Range Category | b. 40 – 59 m |
| Max Head (m) | 45 m |
| Port Size Outlet | 1″ BSPF outlet |
| Powered | Electric |
| Taps | 9 Taps |
| Warranty (months) | 24 Months |
| Volts | 240 V |
| Watts | 560 W |
HIGH EFFICIENCY IMPELLERS
The technopolymer impellers are based on in-depth research into fluid dynamics to increase performance: higher efficiency with lower energy consumption.
NEW MOTOR
The motor has been redesigned to reduce consumption. But also to improve performance.
MECHANICAL SEAL
We have applied a mechanical sealing system that offers two advantages: greater strength and durability, but also greater efficiency, thanks to the combined action with the new hydraulics.
PRACTICAL TO USE
The new retractable handle makes it easier to move the pump, while the hook is designed to use a cord when the pump is lowered into a tank or well.
INTEGRATED ON/OFF ELECTRONICS
The integrated electronic card manages starting and stopping of the pump automatically in relation to the water demand, without the need to install an external controller. This prevents dry running of the pump in the event of a prolonged shortage of water. Easier to install, and easier and safer to use
NON-RETURN VALVE
The non-return valve ensures quick and safe initial installation, allowing immediate priming.
DIRECT ACCESS TO THE CAPACITOR
The capacitor housing is designed to be replaced quickly without the need to remove the pump
