Davey D15A Dewatering Pump

$275.00

SKU: D15A Categories: ,

As part of Daveys Internet Policy we need to contact you to make sure you are buying the right product for your application. Please pay a deposit, and we will call you within 10 minutes (normal business hours) of your order to confirm you have selected the right pump. If not we will gladly assist you in selecting the right pump and otherwise refund you in full.

Payable Today: $27.50 Future Payments: $247.50

Product Documents

Davey D15A Dewatering Sump Pump

A Davey all-rounder, the General Purpose Dewatering Pumps are designed to pump or move rainwater, surface water or storm water effectively. Suitable applications include dewatering of cellars, garages, ditches, pits and ponds, sump emptying, and/or decorative water features.

With an open impeller, centrifugal design, the general purpose dewatering pumps are less susceptible to blockages of the pump or pipework. A corrosion resistant 304SS motor shell and strainer provides an attractive, lasting appearing and ensures a long life. Automatic resetting thermal overload also ensures this product is protected from overload.

“A” models include auto float switch

Power: 150W
Max. flow: 130T/min
Head: 7m
Outlet: 1¼″F / 32mm
Maximum sumbergance: 10m
Maximum Operation Temperature: 50ºC
Maximum soft solid diameter: 10mm
Warranty on pump: 2 Years

Materials of Construction
Motor Top:
Polycarbonate
Pump body:
Cast Iron
Impeller:
Polycarbonate
Mechanical seal: Silicon carbide / ceramic oil in bath
Seal & bottom bearing housing:
Cast Iron
Pump shaft:
304 Stainless Steel
Lip ring:
Nitrile 
Motor shell:
304 stainless steel
Strainer: 304 stainless steel
Handle:
304 stainless steel
Fasteners:
304 stainless steel
Float & power supply leads:
10m HO7RN-F oil resistant

Suitable Fluids: Clean or “grey water” of neutral pH containing up to 10% small soft solids or 1% fine solids. Some wear should be expected while pumping hard solids in suspension.

Electrical Data
Output: 150W
Starting Amps: 9.0 A
Running Amps: 1.5 A

Applications
• Sump emptying
• Septic water disposal
• Water transfer
• Pumping of neutral, nonaggressive factory waste water

Installation & Priming

Use a rope to position and retrieve the pump. Do not lower or retrieve the pump using the power lead as this may damage the cable entry seals, causing water leaks and unsafe operation. Don’t use this product for recirculating or filtering swimming pools, spas, etc. While these pumps are built to high safety standards, they are not approved for installations where people will be in the water while they are operating. Don’t pump abrasive materials. Sand and grit in the water being pumped will accelerate wear, causing shortened pump life. Keep your pump clean, particularly in situations where lint, hair or fibrous materials may get bound around the pump shaft. Regular inspection and cleaning will extend pump life. Make room for the float switch to operate.  automatic models have a float switch to turn them on when the water level rises and turn them off again when it has been pumped down to the safe operating level of the pump. If the float switch is not free to rise and fall, correct pump operation may not be possible. Don’t run your pump dry

Brand

Davey

davey logo
Shopping Cart
There are no products in the cart!
Continue Shopping
0
Wishlist 0
Continue Shopping