Davey Dynaflo 6200 Single Stage Centrifugal Transfer Pump 250V
WHY CHOOSE THE Davey Dynaflo Single Stage Pump?
Every pump is performance and pressure tested in our factory to ensure quality and reliability.
Noryl pump casing with metal hoop strengthened inlet and outlet ports is a proven robust pump design for long life.
O-ring sealed hand tightened priming and drain plugs for easy operation.
304 stainless steel pump shaft for long life.
Davey manufactured IP56-TEFC,2 pole motor is corrosion
resistant and protects against vermin, dust and water.
Motor and pump are designed for frequent starts providing a long and reliable working life.
In-built thermal overload protection with automatic reset in all single phase models for long term motor protection.
Double contact seal, C3, high temperature greased bearings for long life and smooth running.
2m power lead with 10amp Australian three pin plug fitted to all single phase models.
Corrosion resistant motor mounting feet for long life.
Dimensions (mm): 345L x 250W x 265H
Weight: 16.5Kg
Warranty: 2 Years
APPLICATIONS
• Water supply
• Water transfer
• Hosing down – dairies, factory floors etc.
• Tank filling
• Sprinkler supply
• Garden reticulation
OPERATING LIMITS
Capacities to: 270 lpm
Maximum total head: 25.5m
Maximum suction head: 7m
Maximum water temperature
– Continuous – 50ºC
– 10 minute peak – 70ºC
Minimum water temperature: 1ºC
Inlet size: 1½” BSP(F)
Outlet size: 1¼” BSP(F)
Maximum casing pressure: 50m
MATERIALS OF CONSTRUCTION
Impellers : Glass filled Polycarbonate
Pump casing : Glass filled Noryl
Seal ring (stationary) : Ceramic
Seal ring (rotating) : Carbon
Shaft : 304 stainless steel
Seal elastomer : Nitrile rubber
Pump o-rings : Nitrile rubber
Motor shell : Aluminium
Shell finish : Baked enamel
Motor mounting feet : Xenoy plastic
Motor through bolts : 304SS with brass nuts
Motor fan : Polypropylene
INSTALLATION & PRIMING
• Installation with suction lift require a good quality foot valve to avoid loss
of prime.
• To prime, fill pump body and suction line through priming plug hole
located above suction inlet and replace plug.
ELECTRICAL DATA
Supply voltage: 220-250
Supply frequency: 50Hz
Phase: Single
Full load current: 6.8A
Locked rotor current: 27A
Input power: 1.5kW
Output power: 1.0kW
Insulation: Class F
Starting: P.S.C.
IP rating: IP56
