Davey HM60-08T Home Pressure System With Torrium 2 Pressure Controller
The HM Water Pressure System range with Torrium2 controller is a premium product designed for multi-storey buildings and homes with high pressure needs.
With all stainless-steel pump and hydraulic componentry, and the ability to sustain high water temperatures, the HM Water Pressure System is ideal for household and domestic water supply, farming and agricultural use and irrigation or turf watering applications.
The HM water pressure systems have been certified and tested to comply with the requirements of the AS/NZS 4020 standard. The AS/NZS 4020 standard stipulates that products in contact with drinking water do not affect the taste or appearance of the water, do not support the growth of micro-organisms and do not release cytotoxic or mutagenic compounds or metals into the water.
Motor / power: 720W
Max. flow: 80T/min
Head: 58m
Inlet: 1.25″F / 32mm
Outlet: 1″M / 25mm
Pressure: 575kPa
Body: 304 Stainless Steel
Impeller:304 Stainless Steel
Stages: 304 Stainless Steel
Pump Shaft: 316L Stainless Steel
Stage Centring device: 304 Stainless Steel
Mechanical Seal : Carbon
Warranty on pump: 2 Years
Applications:
• Water supply, boosting & transfer
• Irrigation & turf watering
• Wash down
• Emptying/filling reservoirs or tanks
• Water treatment (demineralisation, filtering etc)
• Commercial washing equipment
Features:
Horizontal multistage centrifugal pump with all hydraulic parts in stainless steel:
- Suitable for high water temperatures
- Corrosion & wear resistant
Axial suction & vertical discharge:
- Compact design
- Easy to install
Stainless steel impellers with high efficiency impeller profile & thick self-centring impeller neck rings for:
- High efficiency
- Reduced power consumption
- Low noise output
Impellers mounted directly on extended motor shaft:
- Maximise performance per stage
- High efficiency
- Long motor & pump life
- Increased wear resistance
Pump casing assembly attached to motor bracket at 8 points with oring seal:
- Complete stainless casing
- Better sealing
- Longer service life
Davey built, totally enclosed fan cooled (TEFC) electric motor:
- Single-phase motors have built in thermal overload protection with automatic reset and 1.8m long power lead and Australian 3 pin plug
- Sealed and greased for life motor bearings
- Over sized drive bearing
- Longer life
- Easy service
- Economical & quiet running
Capacities up to: Pressure Switch models 430lpm (26m3 /hr)
Torrium2® models 200lpm (12m3 /hr)
Pressure heads up to 65m
Maximum operating pressure 1000kPa (depends on controller & pressure tank)
Maximum ambient temperature 50o C
Frequency 50Hz
Suitable fluids: Clean potable water of neutral ph containing no solids or abrasives.
