Grundfos CMB 1-36 I-C-A-A-P-A With Pressure Switch – 98244555
The Grundfos CM PS Booster is an automatic booster system for water supply in domestic and agricultural applications as well as other installations where minor leakages are expected to occur. The booster system consists of a Grundfos CM pump, a five-way valve and a pressure switch. A pressure tank must be fitted to complete the booster system. Grundfos GT tanks make a perfect fit for your booster system. The pressure band is approximately 1 bar. When the system has been connected to the pipes, it is all a matter of inserting the plug into a power supply socket, and the system is operational.
*Note: The CMB-PS range require a pressure tank – sold separately to operate.
Motor / power: 500W
Max. flow: 25LT/min
Head: 36m
Inlet: 1″F / 25mm
Outlet: 1″M / 25mm
Pressure: 360kPa
Body: 304 Stainless Steel
Diffuser: Technopolymer
Impeller:304 Stainless Steel
Pump Shaft: 304 Stainless Steel
Mechanical Seal : Carbon with resin/ceramic
Start pressure: PM1 – 1.5 bar
Components: – Non self-priming stainless steel pump with PM1 – Cable 1.2 m with plug
Liquid temperature: 0°C to +60°C
Ambient temperature: 0°C to +55°C
Supply voltage: 1 x 240 Volt 50 Hz
System pressure: Maximum 10 bar
Enclosure class: Suitable for covered installation (IP55)
Warranty on pump: 2 Years
Code: 98244555
The table below gives a brief overview of the features of the PM 1: