CMB5-46 A-C-A-A-B-B Pressure Pump with PM1 Controller 97530169
 |
 |
|---|---|
 |
 |
The Grundfos CM Booster with pressure manager PM1 is a compact booster set for water supply in domestic applications. The pressure booster unit consists of a Grundfos CM pump and a Grundfos pressure manager PM1. The pressure manager allows the pump to start and stop automatically according to demand and protects the pump from dry running. The CM Booster is very easy to install. When the booster has been connected to the pipework, it is all a matter of plugging the plug into a socket, and the system is operational.
Features
- Compact
- Easy installation
- Dry-running protection
- Anti cycling (leakage detection)
Applications Grundfos CM PM1 Booster is mainly used for domestic and light commercial water supply or booster systems.
NB:
Suction lift: Max. 1 m, including suction-pipe pressure loss at a liquid temperature of 20 °C. (not self-priming)
Motor / power: 900W
Max. flow: 100T/min
Head: 46m
Inlet: 1¼″F / 32mm
Outlet: 1″M / 25mm
Pressure: 460kPa
Body: 304 Stainless Steel
Diffuser: Technopolymer
Impeller:304 Stainless Steel
Pump Shaft: 304 Stainless Steel
Mechanical Seal : Carbon with resin/ceramic
Start pressure: PM1 – 2.2 bar
Components: – Non self-priming stainless steel pump with PM1 – Cable 1.2 m with plug
Liquid temperature: 0°C to +60°C
Ambient temperature: 0°C to +55°C
Supply voltage: 1 x 240 Volt 50 Hz
System pressure: Maximum 10 bar
Enclosure class: Suitable for covered installation (IP55)
Warranty on pump: 2 Years
Code: 97530169
The table below gives a brief overview of the features of the PM 1:
Terms And Conditions:
To receive a $50 “Review Reward” eGift Card, you must have purchased an eligible product (CMBooster pump) in Australia or New Zealand and have left a review for the product on ProductReview.com.au between 1 September 2024 and 31 December 2024.
The first 100 reviewers registered within these dates will be eligible to receive the $50 eGift Card “Review Reward”.
A valid invoice (proof of purchase) must be uploaded when registering for your prezzee smart eGift Card. A $50 eGift Card will be emailed to the provided email address within one month of the completion of the review. Multiple registrations for the same model pump will not be accepted.
How to apply for a $50 PREZZEE Smart eGift Card:
Step 1:
- Purchase a Grundfos CMBooster
- Let us know what you think of the CMBooster on ProductReview.com.au by scanning the QR code or by going to ProductReview.com.au and searching for CM Booster.
- Make sure you tick “Incentivised” when you leave your review.
Step 2:
- Once you’ve left your review, register for your $50 PREZEE Smart eGift Card by scanning the QR code to access our “Review Reward” Registration site.
- Have your proof of purchase handy so you can upload it when registering.
