Grundfos Hydro SOLO-E CRIE 3-11 Variable Speed Pressure Booster Pump Package
SKU: Hydro Solo-E CRIE 3-11 1X200-240V – 98645395
The Grundfos Hydro Solo-E booster system is a complete, stand-alone solution that enables you to maintain constant pressure in your system at all times. It is constructed from high quality materials with a stainless steel outlet pipe, pressure transmitter, gauge, pressure tank and non-return valve. The Hydro Solo-E is ideal for apartment buildings, schools, hotels, office buildings, industrial water supply systems, water treatment systems, water filtration systems, small industries and washing and cleaning systems.
- Commercial water pressure boosting
- Water distribution
- Drip/Micro Spray
- Frost protection
- Pivot
- Agricultural Surface Water
The Grundfos Hydro Solo-E booster set is a fully-optimized booster system with constant pressure control, flow estimation and plug-and-pump installation.
- Pre-programmed functions – An easily installed, compact solution with pre-programmed functions, ensuring immediately-optimised operation and cost savings over a long system lifetime.
- Smooth Operation – Constant pressure regardless of consumption, with energy-efficient operation and reduced water hammer.
- Sustainable Solutions – Low energy consumption thanks to the CRIE vertical multi-stage pump with IE5 motor.
- Low Maintenance – No need for motor protection. Less risk of pump damage and lower maintenance costs.
Max Pressure: 1100kPa | 110m Head
Max Flow Rate: 1.6m³/h | 1.5l/s | 90l/min
Power: 1.5kW – Single Phase 240V
Inlet: 32mm | 1¼”
Outlet: 32mm | 1¼”
Tank: 18 Litre PN16
Ambient temperature: From 0°C to +40°C
Liquid temperature: From 0°C to +60°C
Max. operating pressure: 16 bar
Power supply: 1~ is 1 x 200-240 Volt N, PE 50 Hz 3~ is 3 x 380-415 Volt, PE 50 Hz
Base Plate: CRIE1-20 Stainless steel AISI 304, CRIE32-64 and all CUE models on Galvanised base plate
Manifold: Stainless steel AISI 316
Valving: Isolation valve and non-return valve
Tank: Included in the scope of supply
Includes: Discharge pressure transmitter & pressure gauge
Pump mechanical seal: HQQE (Balanced cartridge seal with O-Ring / Silicon Carbide / Silicon Carbide / EPDM)
Enclosure class: IP 55
Motor efficiency: IE5 (CRIE64 systems are IE3) 1×200-240 Volt Motors above 1.5 kW use 240 Volt CUE variable speed drives with an IE3 motor efficiency
Motor Speed: Up to 3500 rpm
Note: P2 is nominal motor power
INCLUSIONS
- x1 304ss stainless steel base plate
- x1 316ss stainless steel manifold
- x1 Isolation valve and non-return valve
- x1 Grundfos steel pressure tank
- x1 Discharge pressure transmitter & pressure gauge
- x1 HQQE (Balananced cartridge seal with O-ring / Silicon Carbide / EPDM)
- x1 IP55 Enclosure class
