Grundfos MAGNA3 25-100 Circulator Pump 97924247

$2,770.00

Grundfos MAGNA3 25-100 Circulator Pump 

The Grundfos MAGNA3 circulator pump is the ideal choice for almost any building project – old or new. With its unrivalled energy efficiency, all-encompassing range and built-in communication capabilities, MAGNA3 is ideal for engineers and specifiers looking to create high-performance heating and cooling systems. The pump is maintenance-free due to the canned-rotor type design. This also means that pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.

Free Delivery Australia Wide

Availability: In stock

SKU: MAGNA3 25-100 Categories: , GTIN: 5710626493241

Grundfos MAGNA3 25-100 Stainless Steel Circulator Pump – 97924247

The MAGNA3 25-100 is a circulator pump based on the tried and tested MAGNA3 25-100 technology and our industry-leading experience with electronic pumps. The permanent magnet motor, AUTOadapt function and integrated frequency converter is still part of the MAGNA3 25-100 package, but we’ve added some additional, ground-breaking new technologies. The result is a cutting-edge piece of intelligent technology that retains the unrivalled Grundfos reliability.

MAGNA3 25-100 is a single-phase pump and characterised by having the controller and control display integrated in the control box. The pump also has a built-in differential-pressure and temperature sensor. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of stainless steel and the stator housing is made of aluminium. The power electronics are air-cooled. MAGNA3 25-100 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.

Suitable For:

  • Mixing loops
  • Heating surfaces
  • Air conditioning surfaces
  • Ground-source heat pump system.
  • Smaller chiller applications.
Max Power Unit 153W
Mains Frequency 50 / 60 Hz
Rated Voltage 1 x 230 V
Pumped Liquid Water
Liquid Temperature Range -10 to 110°C
Rated Flow 5.43 litres / min
Rated Head 6.273 meters
Pump Housing Cast Iron
Impeller Stainless Steel
Port to Port length 180mm
Type of Connection G
Size of Connection 1 1/2 inch

The highest standards, the greatest results

Ready for range?
MAGNA3 is a truly full-range pump with more than 200 different single and twin circulators in cast iron or stainless steel. We have also increased the maximum twin to 18 m and the flow to 70 m3/h. Get ready to specify a perfectly sized circulator pump for any HVAC application.

The smart pump
MAGNA3 gives you new opportunities with more intelligent control modes, optimized building
management communication and a built-in heat energy meter. It also allows you to save pump
throttling valves in the system. It is fair to say that we have raised the bar for intelligent pumping

Efficiently the best
The short version is this: MAGNA3 is the most efficient circulator available on the market today.
The longer version is this: With an Energy Efficiency Index (EEI) well below the EuP benchmark level you can achieve energy savings of up to 75% compared to a typical installed circulator and thereby a remarkably fast return on investment. And of course it more than meets the standards for EuP legislation (learn more at www.europump.org).

Reliable from A to Z
At Grundfos we do not take testing lightly. With 40 years of experience with electronically controlled pumps and 1 million test hours for the MAGNA3 in extreme conditions, including alternating pressure tests, high humidity tests as well as high and lowtemperature tests, we are confident that this pump will serve you day in and day out for many years to come.

MAGNA3 25-100

Full range means perfect fit
The extended MAGNA3 range with maximum heads of 18 m and maximum flows of 70 m3/h features more than 200 single and twin pumps in cast iron or stainless steel. This means that it is much easier to right-size the MAGNA3 for any duty point and cut both purchase and energy costs in the process.

MAGNA is always improving
Grundfos continues to set the pace for circulator pumps and is the obvious choice if you are looking for the most energy-efficient solution and fastest return on investment. To achieve the groundbreaking MAGNA3 energy efficiency, we have further optimized pump hydraulics
and incorporated our patented differential pressure sensor, while switching to a composite rotor can and a compact stator that minimizes losses in the motor. The result is a highly efficient and future-proof circulator with an EEI value that makes even the strict 2015 EuP requirements look old-fashioned.

The all-purpose circulator
Like its predecessor, MAGNA3 is the ideal pump for heating and cooling applications as well as domestic hot water circulation systems. It is designed to handle liquids down to -10°C, which makes it suitable for both tough industrial tasks and ground source heat pump systems (GSHP). Furthermore, the liquid temperature (-10°C to +110°C) is now independent of the ambient temperature (0°C to +40°C). So whether your project requires heating or cooling – MAGNA3 is
the pump for you.

Refurbish and save money
Did you know that a pump system refurbishment can result in energy savings of up to 80%? Grundfos offers several approaches to energy refurbishment, depending on the condition of your current pump system. For more information, please contact your local Grundfos representative.

Intelligent control saves time and energy
The MAGNA3 gives you the full range of control mode options you would expect from a state-of-the-art circulator pump. But the intelligent modes – AUTOADAPT and FLOWADAPT – set MAGNA3 apart from the competition. Furthermore, the FLOWLIMIT and Automatic Night Setback control functions are applicable with all MAGNA3 control modes.

MAGNA3 25-100

INTELLIGENT SOLUTIONS
Built for building management
Optional CIM modules support all common fieldbus standards, making MAGNA3 the perfect addition to any BMS system.
Heat energy meter
The MAGNA3 features a built-in heat energy meter that can monitor system heat energy distribution and consumption in order to avoid excessive energy bills caused by system imbalances. The heat energy meter has an accuracy of +/-10%, depending on the duty point, and will save you the cost of installing a separate energy metering device within your system.
No pump throttling valves
The new FLOWLIMIT function and FLOWADAPT control mode allow you to set a maximum flow limit for your MAGNA3 pump. The pump continuously monitors the flow rate to ensure the desired maximum flow is not exceeded. This eliminates the need for pump throttling valves and hereby improves the system’s overall energy-efficiency. To meet system flow limitations, the pump will adjust its performance to a given setpoint, which dramatically cuts energy consumption.
Wireless communication between two single pumps
MAGNA3 is supplied with wireless technology which enables it to connect to another MAGNA3 pump. Using the built-in wizard, connection to a parallel coupled pump is quick and easily obtained. The two pumps are now controlled jointly in either cascade mode, alternating mode or pump back-up mode.

MAGNA3 25-100

More I/O for system intelligence
With the addition of an extra configurable relay and an analog input, the complete MAGNA3 I/O package allows for better system monitoring and optimal pump regulation.

MAGNA3 I/O package
1 x analog input (0-10V/4-20mA) for differential pressure sensor, constant temperature control, heat energy metering or external set point
2 x relay outputs configurable as alarm, ready or operation
3 x digital inputs for external start/stop, max. curve and min. curve

Easy optimisation
The innovative 3D Work Log and Duty Point Over Time curve make optimisation simple and accurate. The two new features give you the details of the pump’s performance since the day it was installed as well as the details of its operating conditions, such as average temperature and power consumption. Based on this, it is easy to find the optimal replacement pump, perfect optimisation plan or carry out troubleshooting.

MAGNA3 25-100

MAGNA3 25-100

 

 

MAGNA3 25-100

MAGNA3 25-100

 

MAGNA3 25-100

MAGNA3 25-100

 

 

Brand

Grundfos Pumps

ASC is the largest stockist of Grundfos Domestic Building Products. This includes the famous Grundfos CMB and JET range of domestic water pumps, submersible pumps, waste water pumps, drainage pumps and variable speed pumps. Grundfos Pumps are world renowned pump manufactures, and deliver pumps to over 80 countries world-wide. Grundfos Australia PTY LTD is part of this global network delivering pump expertise and innovation. Whilst initially established to support mining and agricultural sectors, the demand for good quality pumps at a domestic level saw Grundfos bring it's range to Australia. Since 1980, Grundfos Pumps has grown across to five states, bringing one of the most comprehensive range of pumps to the Australian market. Grundfos stands behind all of our products and all of our customers – from farmers who need reliable water in remote paddocks, to miners who need constant supply and pressure to maintain production, to the residents of houses, offices and apartments all over Australia, who’ve come to enjoy a clean and steady water supply as a part of their everyday lives. Grundfos expertise
  • Pumps and Motors
  • Submersible pumps
  • Single stage pumps (end suction, inline and splitcase)
  • Multistage pumps
  • Wastewater pumps
  • Solar and wind powered systems
  • Fire pumps
  • Mixers, flow makers, aerators and ejectors
  • Domestic boosters
  • Boosting pumps and systems
  • De-watering and drainage pumps
  • Dosing and disinfectant pumps
  • Controls and Monitoring
  • Accessories
Grundfos logo
Wishlist 0
Continue Shopping