Hansen Hex Screw Plug

Used for plugging off female threads. The Hansen Hex Screw Plug is ideal for any situation where a reliable threaded connection is necessary.

Hansen Hex Screw Plug

From: $0.85

SKU: HSP Categories: ,

Hansen Hex Screw Plug

HSP

Features & Benefits

  • Precision Heavy Duty Tapered Threads give a Strong Reliable Seal
  • Manufactured from a Raw Material Approved For Use With Potable (drinkable) Water
  • Manufactured from High Quality Glass Fibre Reinforced Nylon giving a Weather, Termite, Fungi & Bacteria Resistant
  • Common Applications Include Horticultural, Agricultural, Irrigation, Marine & Plumbing
  • Material strong enough to minimise potential cross threading
  • WRAS – Approval for use with potable (drinkable) water as they will not leach contaminants into the water.
  • Suitable for use above or below ground in varying operating pressures and temperatures
  • Strong, Lightweight and Compact
  • Available in a variety of thread combinations and connections.
  • New Zealand Made

 

Threaded Fitting Installation

 

 

 

FAQ

Can I use Hansen fittings in my swimming pool/spa set up?

No, as the high concentration of chlorine used in the water for pools will attack the material. The fitting material is only suitable for use with domestic water. Hansen products that are used in this application will not be covered by our Hansen Warranty.

Can I use these fittings with metal fittings?

Yes. For more information on installation tips refer to installation instructions.

Do I need to support my fittings?

Yes. All pipe work must be adequately supported.

Does this fitting carry Hansen Warranty?

Yes, all Hansen manufactured products carry our Hansen Warranty.

Can I use Hansen True Fit Fittings under driveways, paths and other solid foundations?
No, Hansen does not recommend the use of any Hansen Easy Fit Fittings under any driveways, paths or solid foundations.
How tight should I tighten my Hansen threaded fittings?
Do not over tighten. The right way to assemble a threaded fitting is hand tight plus one to two turns – no more! For more information on installation tips refer to installation instructions.
Which type of thread sealant is recommended?

Use a thread sealant on all threaded connections. We recommend Loctite 5331.

Which temperature can I use my Hansen fittings at?

Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by our Hansen Warranty.

AS/NZS 4020:2018 TESTING OF PRODUCTS FOR USE IN CONTACT WITH DRINKING
WATER

Weight 2 kg
Dimensions 29 × 78 × 34 cm
Size

6mm HSP06, 8mm HSP08, 15mm HSP15, 20mm HSP20, 25mm HSP25, 32mm HSP32, 40mm HSP40, 50mm HSP50, 65mm HSP65, 80mm HSP80, 100mm HSP100

Brand

Hansen

Product Documents

Wishlist 0
Continue Shopping