Hyjet HHR-550 Mains Switch
The HYJET HHR-550 is an automatic Rain / Mains change over pump system allowing tank water to be used for water supply in preference to mains water. The HYJET HHR-550 has a quality proven electronic pressure controller which automatically starts the pump when there is demand for water supply. The pressure controller will only operate the pump if tank water is available. The HYJET HHR-550 will automatically switch to mains water when tank water is empty and in case of power failure. The HYJET HHR-550 does not require an in-tank float switch which makes the system quick and easy to install.
Motor / power: 550W
Max. flow: 60 litres / minute
Head: 38m
Pump Inlet diameter: 1″
Mains Inlet diameter: 3/4″
Outlet diameter: 3/4″
Pump Style: Above Ground
Body Material: AISI 304 stainless steel motor and pump shaft
Warranty on pump: 2 Years
Features
- No in-tank float switch
- Quick & Easy to install
- Suitable for single & double storey homes
- Automatically switches to mains in case of power failure
- Watermarked dual check valve for back flow prevention
Application
- Household water supply & irrigation
- Submersible installation
- Water transfer
- Pressure boosting
- Industrial wash down
Operating Limits
- Max. flow rate 60 L/m
- Max. mains pressure – limited 200 kPa
- Max. head 38m
- Max. liquid temperature: 60°C
- Max. ambient temperature: 40°C
- Voltage 240V, 50Hz
Materials
- Pump casing: Stainless steel AISI 304
- Motor shaft: Stainless steel AISI 304
- Impellers: polymer
- Mechanical seal: graphite / ceramic / NBR
