Puretec Hybrid M1 Undersink Dual Stage Ultraviolet Filtration System
SPECIFICATIONS
0 – 52°C (Protect from freezing)
Connection:
Dimensions (mm) :
335W x 140D x 375H
Warranty:
3 years, 1 year parts and labour, excludes cartridges
When should I change my Puretec filter?
The replacement schedule for your Puretec filter depends on the type of cartridge and your water usage. As a general guideline:
-
Standard cartridges: should be replaced every 6–12 months.
-
Reverse Osmosis (RO) membranes: typically need replacing every 1–3 years.
-
Water Treatment Media kits: typically last 6-10 years, depending on your system and water source.
For precise guidance, refer to your Puretec user guide or consult with our friendly & knowledgeable team on 1300 229 606. Regular filter replacement ensures optimal performance and consistently high water quality.
Installation Note: A water filter system/tap, like any product, has a limited lifespan and if not replaced, will eventually fail. Failure can happen early due to unforeseen circumstances. To avoid possible property damage, this product should be regularly examined for leakage and/or deterioration and replaced when necessary. We strongly recommend that a drain pan, plumbed to an appropriate drain or outfitted with a leak detector, be used in those applications where any leakage could cause property damage.
We also strongly recommend that the water supply be turned off, upstream to the water
filter system/tap, if no one is home for an extended period of time.
INSTALLATION SHOULD BE COMPLETED BY QUALIFIED TRADESPEOPLE.
FAULTY OPERATION DUE TO UNQUALIFIED PERSONS WILL RESULT IN VOIDED
WARRANTY COVERAGE.
Operation
• Allow two minutes for the UV lamp to reach full intensity before starting water flow.
• On a new installation where no other form of sterilisation has been in use, we recommend flushing the pipe work with a suitable sanitiser such as TankSafe (for dosage refer to TankSafe product instructions). This solution should be left in the pipework for at least an hour and preferably overnight.
The sanitising solution can be added into the water tank or if necessary added as a shock dose into the bowl of the filter housing of the Hybrid-M1 and slowly flushed through the piping. If added as a shock dose the system and pipework should be rinsed thoroughly by opening a downstream tap.
