Zenit ZEN-DGBLUE100/2/G40VMGEX Submersible Vortex Pump – 800347
Efficient operation submersible cast iron pumps suitable for use with soiled biological wastewaters, sewage in
rainwater & seepage. This electric pump is intended for both domestic and commercial use. DG (DRAGA) version
with technopolymer vortex recessed impeller to pass soft solids to 40mm diameter. A 10m power lead (with 3 pin
plug on single-phase pumps) to suit outdoor installations.
Patented sealing system incorporating dual Silicon Carbide /Graphite Alumina mechanical seals in oil bath for
longer seal life. Also includes an anti-stressing system for power cable reduces cable damage and water entry, a
cable holder grommet built into handle allows adjustment of float switch cable length, a cast iron pump body for
durability, cast iron support base assists in the passage of soft solids to 40mm and an ergonomic technopolymer
carry handle for safety and comfort.
Technical Specifications
| Brand | Zenit Pumps |
| Product Type | Submersible Pump |
| Suitable For | Dirty Water |
| Bar | 1.15 Bar |
| Approval | IECex Zone 2 Approved |
| Flow Range Category | e. 400 – 499 L/min |
| Flow Rate (L/min) | 430 L/min |
| Hp | 1 Hp |
| Kilo Watts | 0.75 kW |
| Head Range Category | a. 0 – 39 m |
| Max Head (m) | 11.5 m |
| Port Size Outlet | 1 1/2″ BSPF outlet |
| Particle Size | 40 mm |
| Warranty (months) | 24 Months |
| Volts | 240 V |
| Watts | 750 W |
SUITABLE FOR:
• Clean or slightly soiled water containing solids up to 40mm
• Wastewater and sewage
• Stormwater dewatering from under houses, yards and ponds
• Groundwater seepage, rainwater collection
• Water features
• Car parks, truck stops, vehicle workshops, bus depots and garages
• Clear or slightly soiled wastewaters
• Strained, seepage and underground pump-out waters
• Irrigation and pumping from wells and reservoirs