Hansen Metric Reducing Bracket Below 25mm Metric x 20mm BSP
SKU: HMDRBE2520
Features
- Manufactured in New Zealand using Best Quality Materials to withstand the harshest weather conditions
- Largest Medium Density fitting range made in New Zealand
- Only Approved Medium Density range made in New Zealand
- O-Ring is pre-lubricated for easy pipe insertion and reliable leak-free connections
- Manufactured from UV Stabilised High-Quality Virgin Polypropylene giving weather, termite, fungi and bacterial resistance
- High-Pressure Rating
- Sleek, Compact Design for easy installation
- Easy Grip Nuts for rapid winding onto the pipe
- Dependable High-Quality Threaded Components
- Potable (Drinking) water approved
Technical Info
Pressure & Flow Rate
Fitting sizes 16mm to 63mm Maximum Working Pressure; 16 Bar (1600 kPa, 235 psi) at 20 degrees C.
Fitting sizes 75mm to 100mm Maximum Working Pressure; 12.5 bar (1250 kPa, 182 psi) at 20 degrees C.
Dimensions & Materials
Installation & Assembly
Handy Tips for installing Hansen Easy Fit Compression Fittings
FAQ
Can I use MD Fittings in my house water supply?
Yes, Hansen Easy Fit MD Compression Fittings are potable (drinking) water approved.
Does this fitting carry Hansen Warranty?
Yes, all Hansen manufactured products carry our Hansen Warranty.
Can I use Hansen Easy Fit Fittings under driveways, paths and other solid foundations?
No, Hansen does not recommend the use of any Hansen Easy Fit Fittings under any driveways, paths or solid foundations.
How tight should I tighten my Easy Fit MD Compression fittings?
Up to 32mm, just tighten hand tight and all sizes above use a spanner to tighten another 1/2 to 1 turns past hand tight. Remember you already have a seal once the pipe is past the O-Ring, all the Nut is doing is compressing the Grip Ring onto the pipe to hold the pipe in place.
AS/NZS 4020:2018 TESTING OF PRODUCTS FOR USE IN CONTACT WITH DRINKING
WATER