Davey Dynajet XJ90 Home Transfer Pump
Dynajet XJ pumps are an ideal home pressure system to use when drawing water from a level that is below the pump such as in a buried or partially buried tank. There are 3 models available to suit medium to large homes. Dynajet XJ pumps are economical, compact 50, 70 and 90lpm single stage jet assisted centrifugal pumps.
Single stage centrifugal pump with closed vane impeller and jet assist, providing compact design and high pressure performance. Made from corrosion resistant engineering plastic materials ensures long service life, low maintenance and reliable water quality. Our high quality, low-drag mechanical shaft seal means a long life and reliable starting.
FEATURES & BENEFITS
- Manufactured from highest quality corrosion resistant materials
- Compact foot print for quick and easy installation
- Fully adjustable pressure switch allows for installation adjustments
- TEFC motor – corrosion resistant and excludes dust and dirt
- Motor and pump designed for frequent starts
- Every unit individually tested to guarantee reliable operation
- Low maintenance
- Easy to service if required
PUMP Single stage jet assisted centrifugal with closed vane impeller. Brass pump shaft sleeve. Mechanical shaft seal.
MOTOR
Davey manufactured. 2 pole, 2850rpm, 50Hz. TEFC with IP55 enclosure. Class F insulation. Permanently split capacitor design. Double contact sealed C3-HTG rated ball bearings. Protected against both high operating temperatures and high current by a built-in automatically resetting thermal overload. All models supplied with 2m long power lead fitted with Australian 3 pin plug.
• Manufactured from highest quality corrosion resistant materials
• Compact foot print for quick and easy installation
• TEFC motor – corrosion resistant and excludes dust and dirt
• Motor and pump designed for frequent starts
• Every unit individually tested to guarantee reliable operation
• Low maintenance
• Easy to service if required
• Reliable and proven performance.
Compliance with the strict requirements of ISO 9001.2000 quality standard ensures consistency of quality of the system.
Motor / power: 560W
Max. flow: 50T/min
Head: 46m
Inlet: 1″F / 25mm
Outlet: 1″M / 25mm
Pressure: 460kPa
Max Suction Head: 7m
Body: Glass filler noryl
Impeller: Glass filler polycarbonate
Pump Shaft: 303L Stainless Steel
Mechanical Seal : Carbon Ceramic (synthetic)
Warranty on pump: 2 Years
INSTALLATION & PRIMING
• On installations with suction lifts over 1m, a good quality foot valve or non-return valve should be fitted to the suction pipe.
• The system is primed by filling the pump and suction line with water through the priming port, and replacing priming plug prior to switching on.
- Ideal for average homes with modern appliances to large double story homes
- Domestic water supply
- Pressure boosting
- Automatic water transfer
- As well as for domestic irrigation from shallow wells or sand spears
- Overhead or high tank filling
- Pressure boosting
- Water transfer
