Grundfos CMB-SP 3-37 I-C-A-A-C-A Self-Priming Pump 98507628
 |
 |
|---|---|
 |
 |
The Grundfos CM Booster self-priming pump with PM2 pressure manager is a compact booster solution for water supply in domestic applications. The pressure booster unit consists of a Grundfos CM self-priming pump and a Grundfos PM2 pressure manager. The pressure manager allows the pump to start and stop automatically according to demand and protects the pump from dry running. The CM Booster self-priming pump can create a suction lift of up to 8 m, and it is very easy to install. When the booster has been connected to the pipework, just plug it into a socket, and the system is operational.
Features
- compact
- easy installation
- self-priming up to 4 m
- automatic resetting of alarms
- dry-running protection
- anti-cycling (leakage detection)
- maximum continuous operating time.
Applications: The Grundfos CM Booster self-priming pump with PM2 pressure manager is mainly used for domestic and light commercial water supply or booster systems.
Motor / power: 500W
Max. flow: 65T/min
Head: 37m
Inlet: 1″F / 25mm
Outlet: 1″M / 25mm
Pressure: 370kPa
Body: 304 Stainless Steel
Diffuser: Technopolymer
Impeller:304 Stainless Steel
Pump Shaft: 304 Stainless Steel
Mechanical Seal : Carbon with resin/ceramic
Start pressure: PM2 bar
Components: – Self-priming pump CM-SP – Cable 1.2 m with plug
Complete unit: Delivered as a pre-assembled compact unit
Maximum suction lift: 4 m (8m with foot valve)
Liquid temperature: 0°C to +60°C
Ambient temperature: 0°C to +55°C
Supply voltage: 1 x 240 Volt 50 Hz
System pressure: Maximum 10 bar
Enclosure class: Suitable for covered installation (IP55)
Warranty on pump: 2 Years
Code: 98507628
The table below gives a brief comparison of the features of the PM 1 and PM 2. The main features are described beneath the table:
Terms And Conditions:
To receive a $100 “Review Reward” eGift Card, you must have purchased an eligible product (CMBooster Self-Priming pump) in Australia or New Zealand and have left a review for the product on ProductReview.com.au between 1 September 2024 and 31 December 2024.
The first 100 reviewers registered within these dates will be eligible to receive the $100 eGift Card “Review Reward”.
A valid invoice (proof of purchase) must be uploaded when registering for your prezzee smart eGift Card. A $100 eGift Card will be emailed to the provided email address within one month of the completion of the review. Multiple registrations for the same model pump will not be accepted.
How to apply for a $100 PREZZEE Smart eGift Card:
Step 1:
- Purchase a Grundfos CMBooster Self-Priming
- Let us know what you think of the CMBooster Self-Priming on ProductReview.com.au by scanning the QR code or by going to ProductReview.com.au and searching for CM Booster Self-Priming.
- Make sure you tick “Incentivised” when you leave your review.
Step 2:
- Once you’ve left your review, register for your $100 PREZEE Smart eGift Card by scanning the QR code to access our “Review Reward” Registration site.
- Have your proof of purchace handy so you can upload it when registering.
