Grundfos JP 4-54 PM1 BBVP
Grundfos JP 4-54 PM1 booster consists of a Grundfos JP pump and a pressure manager. The JP 4-54 PM1 provides the comfort of constant water pressure with automatic start and stop matched to consumption by the intelligent pressure manager. The pressure manager starts the pump at 1.5 bar and the pump keeps running as long as there is flow.
The design is robust and built upon corrosion-free materials to ensure a long lifetime. This booster set ensures optimum self-priming properties, featuring a suction-lift up to 8 meters. The self-priming pump also ensures a stable operation as is it able to lift liquid from below the inlet level and can handle a mix of air and liquid until the pump reaches a fully-primed pumping condition.
The JP 4-54 PM1 incorporates dry running protection that automatically stops the pump in case of dry running. This means lower risk of pump damage and lower maintenance costs. The anti-cycling function will stop the pump in time in case of a minor leakage in the system, or if a tap has not been closed completely. When cycling occurs, the pump stops, and an alarm will be indicated. A non-return valve for backflow prevention is already integrated.
The JP pump has built-in thermal protection, which immediately stops the pump if it overheats. The motor is air cooled and equipped with oversized, sealed, greased-for-life ball bearings to ensure silent operation and minimum service.
This model was formerly known as the JPC 4-54 PM1
Components: – Self-priming JP pump (see pump characteristics above)
– PM1 (1.5 bar) wired to the pump
– Automatic start/stop of the pump: > start pressure of 1.5 bar
– Dry running protection
– Anti-cycling protection
– Non-return valve integrated
– Cable 1.5 m with plug
Motor / power: 1130W
Max. flow: 66T/min
Head: 46m
Inlet: 1″F / 25mm
Outlet:1″M / 25mm
Pressure: 460kPa
Impeller: Composite
Start pressure: PM1 – 1.5 bar
Ambient temperature: Max. 0°C to +40°C
Liquid temperature: Max. 0°C to +40°C
Suction lift: Max. 8 m
System pressure: Max. 6 bar
Supply voltage: 1 x 230 Volt 50 Hz, 1 x 115V 60Hz
Enclosure class: Suitable for covered installation (IP44)
Version with cable: Cable length 1.5 m with plug
Warranty on pump: 2 Years
Code:99463900
Terms And Conditions:
To receive a $50 “Review Reward” eGift Card, you must have purchased an eligible product (Grundfos Jet pump) in Australia or New Zealand and have left a review for the product on ProductReview.com.au between 1 September 2024 and 31 December 2024.
The first 100 reviewers registered within these dates will be eligible to receive the $50 eGift Card “Review Reward”.
A valid invoice (proof of purchase) must be uploaded when registering for your prezzee smart eGift Card. A $50 eGift Card will be emailed to the provided email address within one month of the completion of the review. Multiple registrations for the same model pump will not be accepted.
How to apply for a $50 PREZZEE Smart eGift Card:
Step 1:
- Purchase a Grundfos Jet Pump
- Let us know what you think of your Jet Pump on ProductReview.com.au by scanning the QR code or by going to ProductReview.com.au and searching for Grundfos Jet Pump.
- Make sure you tick “Incentivised” when you leave your review.
Step 2:
- Once you’ve left your review, register for your $50 PREZEE Smart eGift Card by scanning the QR code to access our “Review Reward” Registration site.
- Have your proof of purchase handy so you can upload it when registering.