Zenit DRBLUE40/2/G32VMGEX Submersible Drainage Pump

$790.00

SKU: DRBLUE40/2/G32VMGEX Categories: ,

Zenit DRBLUE40/2/G32VMGEX Floated Drainage Pump 800342

The new series of submersible drainage pumps for domestic use. DR (DRENO) version with multi-vane fully submerged technopolymer impeller for efficient operation, float switch optional on single-phase versions.
Comes complete with 10m power lead (with 3 pin plug on single-phase pumps)to suit outdoor installations. Patented sealing system incorporating dual silicon carbide / graphite alumina mechanical seals in oil bath for a longer seal life. Anti-stressing system for power cable reduces cable damage and water entry. Cable holder grommet built into handle allows adjustment of float switch cable length. Includes a cast iron pump body for durability, a suction screen to keep out hard solids and an ergonomic plastic carry handle for safety and comfort.
Suitable for:
• Clean or slightly soiled water containing small solids
• Stormwater dewatering from under houses, yards and ponds
• Groundwater seepage, rainwater collection
• Water features
• Car parks, truck stops, vehicle workshops, bus depots and garages

Technical Specifications
Brand Zenit Pumps
Product Type Submersible Pump
Bar 0.7 Bar
Approval IECex Zone 2 Approved
Flow Range Category c. 200 – 299 L/min
Flow Rate (L/min) 210 L/min
Hp 0.4 Hp
Kilo Watts 0.3 kW
Head Range Category a. 0 – 39 m
Max Head (m) 7 m
Port Size Outlet 1 1/4″ BSPF outlet
Particle Size 7 mm
Volts 240 V
Watts 300 W


Constructive characteristics:

  • Outlet: G1″¼
  • Outlet orientation: V (vertical)
  • Type of starting: D
  • Weight: 11.5 kg
  • Standard cable type: H07RN-F 3G1
  • EX cable type: N.A.
  • Standard paint type: Bicomponent epoxy paint
  • Maximum acoustic pressure: 70 dB
  • Set of standard mechanical seals: One Silicon carbide mechanical seal (SiC) and One CarbonAluminium oxide mechanical seal (AL)

Test limits:

  • Density of treated fluid: 1 Kg/dm³
  • Viscosity of treated fluid: 1 mm²/s

Materials:

  • Case: Grey Cast Iron – EN-GJL 250 (02)
  • Shaft: Stainless Steel – AISI 420 (23)
  • Cooling jacket: Not applicable (00)
  • Standard gasket: Rubber – NBR (77)
  • EX gasket: Not applicable (00)
  • Nuts and bolts: Stainless Steel – Class A2-70 (42)
  • Hydraulic: Grey Cast Iron – EN-GJL 250 (02)
  • Impeller: Plastic (73)
  • Cutting disk: Not applicable (00)
  • Cutter: Not applicable (00)
  • Grid: Plastic (73)

Brand

Zenit

Wishlist 0
Continue Shopping